professional factory for LED Porch Light for Australia Factories

professional factory for
 LED Porch Light for Australia Factories

Short Description:

The customer satisfaction is our primary target. We uphold a consistent level of professionalism, quality, credibility and service for
professional factory for LED Porch Light for Australia Factories, We sincerely welcome overseas customers to consult for the long-term cooperation and the mutual development.



Product Detail

factory view

FAQ

Product Tags

We aim to find out quality disfigurement from the production and supply the best service to domestic and overseas customers wholeheartedly for Certified Mount Turn Signal Light , Ranch Hitch Adapter Lock , Interior Light Switch , should you have any query or wish to place an initial order please do not hesitate to contact us.
professional factory for LED Porch Light for Australia Factories Detail:

LED Dome light

Specification:

  1. Voltage:12V
  2. Light color:White
  3. Easy installation

 

Installation:
Red wire to Positive , Black wire is Ground wire , Green wire to brake


Product detail pictures:

professional factory for
 LED Porch Light for Australia Factories detail pictures


In the past few years, our company absorbed and digested advanced technologies both at home and abroad. Meanwhile, our company staffs a team of experts devoted to the development of professional factory for LED Porch Light for Australia Factories, The product will supply to all over the world, such as: Faroe Islands , Congo, The Democratic Republic Of The , Brisbane , Our company insists on the purpose of "takes service priority for standard, quality guarantee for the brand, do business in good faith, to deliver qualified, rapid, accurate and timely service for you". We welcome old and new customers to negotiate with us. We'll serve you with all sincerity!

Factory View:

 

QQ图片20161017101840

 

FAQ:

1. Lead Time / Delivery time of mass production

Normally our lead time is 20-35 days.

2.Can you provide free samples? Sample deliver Time?

Yes, one or two free samples are available and you are willing to pay for the air freight

3.MOQ  policy

As  for the trailer hitch series, there is no MOQ. And of course price will be different

according  to different quantity. The MOQ for car bike carrier is 1*20’ container.

4.Payment Terms

As for large orders, T/T and L/C are OK, and for small order we prefer 100% T/T before shipment.

5.Can we order customized colors.

Yes. A MOQ will apply and a longer lead-time is required. Please send us your Pantone Color no.

6.Shipping

We ship small batches by air, and large orders by containers.

7. Can we have our logo on products?

Yes, any item can be with a Logo

 




  • Replace your RV’s incandescent & halogen bulbs with LEDs! It’s easy and we’ll show you how to choose bulb sizes, colors and brightness to match or improve your existing lights, using a fraction of the power.

    M4 LED Products is offering a special discount for RVgeeks viewers. Visit their website at http://M4Products.com and enter the discount code “RVgeeks5″ at checkout to receive a 5% discount on your entire order!

    Watch the other videos in our LED Your RV series:
    Part 1 – Incandescent & Halogen: https://youtu.be/3KF_Ig8sutg
    Part 3 – 18″ Fluorescent Tubes: https://youtu.be/B3JFLErfMxw
    Part 4 – 12″ Fluorescent Tubes: https://youtu.be/82xbqZXeBro
    Part 5 – Docking & Patio Lights: https://youtu.be/fVl-gPaoZhA
    Part 6 – Security, Entry & Reading: https://youtu.be/eajXathp57I

    If you’ve seen our original video about converting our RV’s fluorescent lights to LEDs using strip lights (if not, you can view it here: http://youtu.be/SAMPQrAu0aI ), you may have noticed that it’s been a while since we’ve shared any more tips about switching to LEDs.

    The reason for that is because we’ve been experimenting with converting our RV’s other lights (halogen, incandescent and even other fluorescent light options). But it’s been a bit frustrating, since options for LED color and brightness can be confusing, and many suppliers don’t accurately convey the information you need to choose the color temperature and brightness you want.

    Then we heard about a company on the iRV2 discussion forums called M4 Products. The information on their website was really thorough, and the owner’s fast, detailed response to our questions made us confident that his lights would be the right color and brightness.

    After so much trial & error, buying from M4 was the best experience we’ve had so far. Since we were heading toward southern California, where M4 is located, we made an appointment to stop by to see about upgrading more of our lights.

    Being a fellow RVer, Steve, M4′s owner, was incredibly knowledgeable about LED applications for RVs, and the quality of his products was obvious. We’ve looked at, and tried, our fair share of LED bulbs, and Steve’s are the best quality and best value we’ve found so far.

    Click here to visit M4 Products:

    http://M4Products.com

    To hear about new videos, giveaways and other great RVing content as soon as it’s released, visit our website and subscribe!

    http://TheRVgeeks.com

    The intro music is my own piano performance of Scott Joplin’s Maple Leaf Rag from 1899.

    Full-Time RVers since April 11, 2003, we share DIY (do it yourself) RV maintenance, repair, travel, upgrade and operational tips & tricks.

    While we’re not RV technicians, we’re very mechanically inclined and have learned a lot about RV systems over the years. We’ve handled most of our own minor service, maintenance and upgrade work on both of our RVs.

    We meet lots of newer RVers who are eager to learn some basics about using, maintaining and caring for their rigs. After more than a decade on the road, we’re happy to share what we’ve learned (some of it the hard way). ;-) We hope our experience can help other RVers go DIY, saving time & money while experiencing the satisfaction of a job well done. We’re handy RVers, not professional technicians. We’re happy with the techniques and products we use, but be sure to confirm that all methods and materials you use are compatible with your equipment and abilities. Regardless of what we recommend, consult a professional if you’re unsure about working on your RV. Any task you perform or product you purchase based on any information we provide is strictly at your own risk.

    We sometimes receive products for evaluation at no cost, but our opinions are our own and we only feature products we personally use, love and can recommend to friends with complete confidence. The RVgeeks participate in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.

    Comments welcome! Thanks for watching! Don’t forget to subscribe!



    http://www.etrailer.com/tv-Install-Trailer-Winch-1450200.aspx

    Videos are provided as a guide only. Refer to manufacturer
    installation instructions and specs for complete information.

    Today we are going to install part number 1450200 from Superwinch their S5000 winch. Our first steps involved is basically we measured out our trailer on the inside dimensions that comes out to 79 inches exactly so we just divided that in half and came out with the center point which is about right here. Just make the mark right here and it is a little off from the ribs so put it to right smack dab in the center. Being off 1/ 4 inch is not going to hurt anything. 00:32

    The next step involved is reinforce the bottom of the trailer bed itself. In this case we took it to a weld shop and had them weld an additional aluminum plate underneath our trailer to give it just a little more stability. That way when the winch is underloaded it does not twist out of the bed of the trailer. Next we will show you the attachment points to the winch itself. It only uses these two bolt holes right here, that is the center of the drum itself so that is why we are going to put this in the center of our trailer. One other thing we have to do is the bolt holes are right below the drum itself. You can not see them straight down because the cable is in the way so what we are going to have to do is basically pull out most of the cable to get a straight shot to see the hole through. 01:11

    All right I pulled the cable out of the winch. Pull up this lever here and that makes the winch free spooling at that point. Just keep pulling it all out. Take the cover off. It just pops off on one side and it slides off the other. You can see that the bolt hole is in a straight shot now. All right we have got our center mark here and we will just line up our bolt holes and we are going to push it all the way forward and then we are just going to take a long drill bit and we are just going to use that to mark out our holes. Then take the jack out of the way and then we will start up a 1/ 4 inch bit and then follow up with a 3/ 8 bit. We are satisfied for fit here however some applications bolts will be long enough, some it will not be. In our case we had to go get longer bolts. 01:57

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Plane

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Flag