30% OFF Price For 1-7/8″ Hitch Ball to Tanzania Importers
We believe that long term partnership is a result of high quality, value added service, rich experience and personal contact for 30% OFF Price For 1-7/8″ Hitch Ball to Tanzania Importers, Standing still today and looking into the future, we sincerely welcome customers all over the world to cooperate with us.
30% OFF Price For 1-7/8″ Hitch Ball to Tanzania Importers Detail:
- 1.Ball dia. :1-7/8″, 2″, 2-5/16″
- 2.Shank dia.:3/4″,7/8″,1″, 1-1/4″,etc.
3. Shank length:1-3/4″,2-1/8″,2-1/4″,2-5/16″,2-7/8″,3-3/8″, etc.
4. Gross Loads: 2000lbs,3500lbs, 6000lbs, 7500lbs, 12000lbs, etc.
5. Surface treating: Chrome or Zinc plating, Black Powder Coating, etc.
6. Blister Packing, Display Carton, Wooden Pallets and Bulk Packing are all available.
7. According to V5 or V19 Standard
- 8. with nuts & washers
- 1. Highest quality in strength and accuracy
2. Have a quality finish and fine threads
3. Connect the car and the driven vehicle, which work with the couplers.
4. Easy installation and removal. Innovative quick release changes balls in seconds
5. Durable heat treated shank
6. Hot forged solid steel and also chrome finished to resist rust and corrosion
7. ISO CE certificate & SGS test (according to customer requirements)
8. Customized tow ball is welcome
9. Factory price rather than a trading company. We can promise you good quality and fast delivery
Product detail pictures:
With our leading technology as well as our spirit of innovation,mutual cooperation, benefits and development, we will build a prosperous future together with your esteemed company for 30% OFF Price For 1-7/8″ Hitch Ball to Tanzania Importers, The product will supply to all over the world, such as: Jersey , Algeria , luzern , Our company follows laws and international practice. We promise to be responsible for friends, customers and all partners. We would like to establish a long-term relationship and friendship with every customer from all over the world on the basis of mutual benefits. We warmly welcome all old and new customers to visit our company to negotiate business.
1. Lead Time / Delivery time of mass production
Normally our lead time is 20-35 days.
2.Can you provide free samples? Sample deliver Time?
Yes, one or two free samples are available and you are willing to pay for the air freight
As for the trailer hitch series, there is no MOQ. And of course price will be different
according to different quantity. The MOQ for car bike carrier is 1*20’ container.
As for large orders, T/T and L/C are OK, and for small order we prefer 100% T/T before shipment.
5.Can we order customized colors.
Yes. A MOQ will apply and a longer lead-time is required. Please send us your Pantone Color no.
We ship small batches by air, and large orders by containers.
7. Can we have our logo on products?
Yes, any item can be with a Logo
Chapter 7 of The Original Equal-i-zer Sway Control Hitch product DVD. How to install, hook up and unhook, and maintain the Equal-i-zer hitch.
For more information visit our website: http://www.EqualizerHitch.com
This overview of the installation and set up of the hitch is meant to help you understand how easy the hitch is to operate, and to be used as a reference when it is time to adjust the hitch.
For more detailed information, please refer to the owner’s manual that comes with each hitch. If you have misplaced the instructions, they can easily be downloaded from EqualizerHitch.com. https://www.equalizerhitch.com/Equal-i-zer%20Support/installinstructions.php
Before you begin installation, you will need to find a flat, level, area to work. Gather necessary tools, and prepare a safe working environment.
The tow vehicle and trailer should be loaded just as they would be for a typical camping trip, with full propane and water tanks, empty waste tanks, and all the gear you plan on taking both in the tow vehicle and trailer.
The tow vehicle and trailer should be weighed to make sure that maximum vehicle, trailer, and equipment ratings are not exceeded.
You should take initial tow vehicle measurements. The best spot is usually directly above the front and rear axles at the bottom lip of the wheel wells. These measurements will be used as a reference point to set up and adjust weight distribution.
The major parts of the hitch head include the adjustable shank, the forged hitch head, and the associated hardware.
Install the hitch ball. This can be done by temporarily attaching the forged hitch head to the adjustable shank inserted into the receiver.
Using a torque wrench, tighten the hitch ball nut to its recommended specifications. This usually requires a thin walled socket. If you do not have one of these sockets or an adequate torque wrench, your local Equal-i-zer hitch dealer will likely have one, and may help you for a small fee.
Level the trailer, and measure to the inside-top of the coupler.
This is the height where the top of the hitch ball should be set to start out. In some cases, a specialty shank that provides more rise or drop may need to be used to fit your tow vehicle and trailer combination.
Place washers on the spacer rivet, and insert the rivet into the forged hitch head. Five washers is a good starting point.
Hold the hitch head around the shank so the top of the ball is at or slightly below the coupler measurement, and insert the ¾” hardware. Sometimes the shank may need to be inverted to place the ball at this height.
Tighten the angle set screw. Snug, but do not fully tighten the ¾” hardware yet. Make sure the hitch pin is secure.
Slide the L-bracket studs into the outside link-plates from the back.
To install the sway bracket assembly, the inside and outside link-plates are bolted around the frame at 32″ from the center of the coupler.
If there are obstacles on the frame such as a propane tank or battery mount, you can move the brackets forward slightly to avoid them.
Pinch the link-plates flat against the trailer frame as you snug down the nuts and bolts. Tighten them evenly, alternating between top and bottom about a quarter turn at a time.
Place the L-bracket so that the mounting studs come through the two center holes, and the spring arm plate faces outward. Tighten down the Nylock jam nuts.
The final adjustment of the hitch begins by coupling the trailer and placing the spring arms into the hitch head, and onto the L-brackets.
Secure each with a socket pin and clip, and with an L-pin and clip. If you can’t get the arms high enough using the jack, use the included snap-up lever to lift the bars into place.
Retract the tongue jack so that the weight of the trailer is being carried by the Equal-i-zer hitch.
Re-tighten the angle set screw at the base of the hitch head.
Re-measure the front and rear of the tow vehicle, and compare these measurements to the ones you took earlier. Follow the owner’s manual carefully to check and adjust the weight distribution setup.
The best performance from weight distribution usually comes from a setup where the loaded measurement on the front is about the same as it was when unloaded, and the measurement on the back is a little lower than the unloaded measurement. The rear measurement should never be higher when it’s loaded than it was unloaded.
Adjustments are easily made by adding or removing spacer washers, and raising or lowering the L-bracket.
Remember, you are responsible for the safety of your passengers. Take the time to make adjustments before each trip if necessary. Changes to cargo and vehicle loading may require changes to your hitch setup.
Good weight distribution is a vital part of having the safest and most comfortable towing experience, and with the Equal-i-zer hitch, making those adjustments is easy…
2014 Sheriff Ford F-150 SuperCrew with Whelen Legacy LED Lightbar – SWPS – MCS14F150
Here is a video of a couple Ford F-150 XL SuperCrew trucks we outfitted for McMullen County Sheriff’s office at SWPS.
We installed Whelen’s very intense Legacy DUO+ Super-LED Light bar.
Here is a list of parts we installed:
VTX609C – WHELEN VERTEX SUPER-LED LIGHT WHITE
SSFPOS – WHELEN SOLID STATE HEADLIGHT FLASHER
SAK9 – WHELEN SA315P SIREN MOUNT KIT UNIVERSAL SWIVEL
C-1800 – HAVIS 18″” Enclosed console
C-TMW-F150-02 – HAVIS 2009-2012 Ford F150 Tunnel Mount assembly
C-CUP2-I HAVIS Internal cup holders
C-MC HAVIS Mic clip
C-MCB HAVIS Mic clip bracket
C-ARM-102 HAVIS Side mount armrest
C-ML-LP2 – HAVIS Internal console mount 2″” plate 2 lighter plug outlets 1 map light
C-EB40-CCS-1P – Havis Mount Bracket for Whelen CENCOM remote head
TP-FS-SS-TROY6 – Troy Full Size Stash n Stow Partition w/ Sliding Window and Mesh Screen
2-SAB-RAP11 – Troy Partition Mounting Kit – F-150/Raptor – 2010-2012
2-KP-RAP11-SS – Troy Partition Kick Panel – Stash n Stow – F-150/Raptor 2010-12
475-0051 – Jotto Desk Patriot GR9-870/AR BLM Vertical Mount to Flat/Recessed Housing
GB8SP3J-Package – Whelen Legacy Lightbar Package w/ Cencom & SA315P/SAK, Red, Blue, White, Amber
STPKT61 – Whelen REPLACEMENT STRAP KIT FOR 2004+ FORD F150
IONSMB – Whelen ION Surface Mount Super-LED Lighthead – BLUE – IONSMB
IONSMR – Whelen ION Surface Mount Super-LED Lighthead – RED – IONSMR
IONSMWB – WHELEN SURFACE MT ION LT BLUE (WHITE HOUSING)
IONSMWR – WHELEN SURFACE MT ION LT RED (WHITE HOUSING)
Thank you for watching.