18 Years Factory 2″ Hitch Ball Tunisia Manufacturer

18 Years Factory
 2″ Hitch Ball Tunisia Manufacturer

Short Description:

We are ready to share our knowledge of marketing worldwide and recommend you suitable products at most competitive prices. So Profi Tools offer you best value of money and we are ready to develop together with 18 Years Factory 2″ Hitch Ball Tunisia Manufacturer, Create Values,Serving Customer!" is the aim we pursue. We sincerely hope that all customers will establish long term and mutually beneficial cooperation with us.If you wish to get more details about our company, Please contact with us now.

Product Detail

factory view


Product Tags

Our mission will be to grow to be an innovative supplier of high-tech digital and communication devices by giving worth added design and style, world-class production, and service capabilities for Quality Trailer Light Board , SAE 5/8" Chrome Trailer Lock , Tail Light Holder , We are not satisfied with the present achievements but we are trying best to innovate to meet buyer's more personalized needs. No matter where you are from, we are here to wait for your kind request, and welcom to visit our factory. Choose us, you can meet your reliable supplier.
18 Years Factory 2″ Hitch Ball Tunisia Manufacturer Detail:

Hitch Ball


  1. 1.Ball dia. :1-7/8″, 2″, 2-5/16″
  2. 2.Shank dia.:3/4″,7/8″,1″, 1-1/4″,etc.
    3. Shank length:1-3/4″,2-1/8″,2-1/4″,2-5/16″,2-7/8″,3-3/8″, etc.
    4. Gross Loads: 2000lbs,3500lbs, 6000lbs, 7500lbs, 12000lbs, etc.
    5. Surface treating: Chrome or Zinc plating, Black Powder Coating, etc.
    6. Blister Packing, Display Carton, Wooden Pallets and Bulk Packing are all available.
    7. According to V5 or V19 Standard
    8. with nuts & washers
  3. des-ball01des-ball02
  4. Features:
  5. 1. Highest quality in strength and accuracy
    2. Have a quality finish and fine threads
    3. Connect the car and the driven vehicle, which work with the couplers.
    4. Easy installation and removal. Innovative quick release changes balls in seconds
    5. Durable heat treated shank
    6. Hot forged solid steel and also chrome finished to resist rust and corrosion
    7. ISO CE certificate & SGS test (according to customer requirements)
    8. Customized tow ball is welcome
    9. Factory price rather than a trading company. We can promise you good quality and fast delivery

Product detail pictures:

18 Years Factory
 2″ Hitch Ball Tunisia Manufacturer detail pictures

It truly is our responsibility to fulfill your requirements and successfully provide you. Your fulfillment is our best reward. We're seeking forward in your check out for joint development for 18 Years Factory 2″ Hitch Ball Tunisia Manufacturer, The product will supply to all over the world, such as: Palau , Palestine , Moldova , We focus on providing service for our clients as a key element in strengthening our long-term relationships. Our continual availability of high grade solutions in combination with our excellent pre-sale and after-sales service ensures strong competitiveness in an increasingly globalized market.

Factory View:





1. Lead Time / Delivery time of mass production

Normally our lead time is 20-35 days.

2.Can you provide free samples? Sample deliver Time?

Yes, one or two free samples are available and you are willing to pay for the air freight

3.MOQ  policy

As  for the trailer hitch series, there is no MOQ. And of course price will be different

according  to different quantity. The MOQ for car bike carrier is 1*20’ container.

4.Payment Terms

As for large orders, T/T and L/C are OK, and for small order we prefer 100% T/T before shipment.

5.Can we order customized colors.

Yes. A MOQ will apply and a longer lead-time is required. Please send us your Pantone Color no.


We ship small batches by air, and large orders by containers.

7. Can we have our logo on products?

Yes, any item can be with a Logo


  • http://www.etrailer.com/tv-demo_trailer_brakes_and_wiring.aspx

    Videos are provided as a guide only. Refer to manufacturer
    installation instructions and specs for complete information.

    Today we are going to show you how to install brakes on a trailer that does not have existing brakes. It is actually pretty easy to do it is just very time consuming. There are a few things you want to look out for before you start. One of those things is look being the existing hub you have. Make sure you have a flange like this on the axle. It is this 4 bolt flange on here if you have that on your axle your pretty much home free. You will see it on 3,500 pound axles like we have here. You also see it on 2,000 pound axles. On a 3,500 pound one you would probably use a 10 inch drum and on a lighter 2000 pounds, you would use a 7 inch size. Also you notice we have the hub missing. We have to take that off because the hub and drum assembly it is all in one piece. You have to take off the old hub get rid of it and start off fresh. For this install we are going to install the backing plate. Basically it slides on like so then you just bolt it onto 4 places. A couple things you might want to take note of is there is a left and right side to it also an up and down. The magnet always stays pointed to the ground. If you did not have a sticker like this one does another way to tell is look for this bow here. The actuating arm or bow always points to the front of the trailer so thats a good reference point for you. At this point lets start bolting on our hubs. Works down in a criss cross pattern makes sure you have them evenly tightened. Go ahead and do the same thing for the other side. One thing to note while you are adding the hubs to a trailer. This is double protection that keeps grease in and has a little bit extra pressure. You can also tell it is a double lip seal because it has a spring. Every double lip seal out there has a spring in it. So you have an EZ Lube Spindle or double check. Some spindles like this one come with a tang washer. If yours is just the normal spindle then you just have a counter pin that goes through. In this case we have the EZ Lube spindle so we will go ahead and assemble it. It is only one extra step involved. Make sure you take out any play. A little bit is fine just a hair is all you need. Then flip this edge into place like so. Get it to stop then bring it back one notch. If you had a regular spindle we would be finished by now but since we have the EZ Lube spindle we will go ahead and use that feature fully pack the bearings and bring out the grease to both bearings. Installing our hub is complete now. The next step is to adjust the brakes. From here what we need to do is go ahead and adjust our brakes. Basically what we are going to do is tighten up the drum until it stops turning. Then back off 10 clicks then you should have a very fine light drag. What we need to do now is go ahead and start running the wires. We are going to follow the factory harness back onto the driver side wheel. Then we are going to follow the axle on over to the passenger side wheel. Once you are by the axle here go ahead and leave a little loop for working room. Then make sure it is tied to your passenger side wheel. We will go ahead and at this point zip tie the wire to the axle. At this point you have your wire set across the axle the way you want it so we will go ahead and pull the slack up to the front of the trailer. We will go ahead and make our connection to the wires here. Make sure you note that one wire goes to ground and the other wire goes to positive. Again it does not matter the magnet does not care. We will move over to our driver side now and what we are going to do is install our ground on the inside of the frame here. We are going to put our 7 pole connector on next. It is time to connect to 7 pole connector. What you want to do is match up the colors obviously but there are a few different codes. For instance sometimes red is left turn but on the trailer it is actually yellow. The only common ones is white is ground wire and blue will be used as our black wire. Which the black wire is actually used on here as the 12 volt power lead. We will start off with the ones that match up and that would be the white. Then we will do the brake wire and on the trailer it is black but on the 7 pole it will be blue. Left turn on our trailer is yellow but the left turn on our 7 pole is red. We have green here which is running light and on the trailer it is brown. Finally green is right turn on our trailer and that is brown on our 7 pole. Next we put our connector back in with the little screw. We fix our loom and tighten the last screw.

    A tutorial video on hooking up a trailer with a hitch with a two 5/16″ ball.

    Send your message to us:

    • * CAPTCHA: Please select the House

    Related Products

    • * CAPTCHA: Please select the Star