11 Years Factory 1-7/8″ Hitch Ball to Cape Town Factories

11 Years Factory
 1-7/8″ Hitch Ball to Cape Town Factories

Short Description:

Our development depends on the advanced equipment, excellent talents and continuously strengthened technology forces. 11 Years Factory 1-7/8″ Hitch Ball to Cape Town Factories, We fully welcome customers from all over the world to establish stable and mutually beneficial business relationships, to have a bright future together.



Product Detail

factory view

FAQ

Product Tags

The company keeps to the operation concept "scientific management, high quality and efficiency primacy, customer supreme for Brake Light Failure , 1-7/8" Hitch Ball , Rv Interior Light Bulb Size , We warmly welcome mates from all walks of life to hunt mutual cooperation and develop a more good and splendid tomorrow.
11 Years Factory 1-7/8″ Hitch Ball to Cape Town Factories Detail:

Hitch Ball

Specification:

  1. 1.Ball dia. :1-7/8″, 2″, 2-5/16″
  2. 2.Shank dia.:3/4″,7/8″,1″, 1-1/4″,etc.
    3. Shank length:1-3/4″,2-1/8″,2-1/4″,2-5/16″,2-7/8″,3-3/8″, etc.
    4. Gross Loads: 2000lbs,3500lbs, 6000lbs, 7500lbs, 12000lbs, etc.
    5. Surface treating: Chrome or Zinc plating, Black Powder Coating, etc.
    6. Blister Packing, Display Carton, Wooden Pallets and Bulk Packing are all available.
    7. According to V5 or V19 Standard
  3. 8. with nuts & washers
  4. des-ball01des-ball02
  5.  Features:
  6. 1. Highest quality in strength and accuracy
    2. Have a quality finish and fine threads
    3. Connect the car and the driven vehicle, which work with the couplers.
    4. Easy installation and removal. Innovative quick release changes balls in seconds
    5. Durable heat treated shank
    6. Hot forged solid steel and also chrome finished to resist rust and corrosion
    7. ISO CE certificate & SGS test (according to customer requirements)
    8. Customized tow ball is welcome
    9. Factory price rather than a trading company. We can promise you good quality and fast delivery

Product detail pictures:

11 Years Factory
 1-7/8″ Hitch Ball to Cape Town Factories detail pictures


To constantly improve the management system by virtue of the rule of "sincerely, good faith and quality are the base of enterprise development", we widely absorb the essence of related products internationally, and constantly develop new products to meet the demands of customers for 11 Years Factory 1-7/8″ Hitch Ball to Cape Town Factories, The product will supply to all over the world, such as: Egypt , Qatar , Angola , By adhering to the principle of "human oriented, winning by quality", our company sincerely welcomes merchants from at home and abroad to visit us, talk business with us and jointly create a brilliant future.

Factory View:

 

QQ图片20161017101840

 

FAQ:

1. Lead Time / Delivery time of mass production

Normally our lead time is 20-35 days.

2.Can you provide free samples? Sample deliver Time?

Yes, one or two free samples are available and you are willing to pay for the air freight

3.MOQ  policy

As  for the trailer hitch series, there is no MOQ. And of course price will be different

according  to different quantity. The MOQ for car bike carrier is 1*20’ container.

4.Payment Terms

As for large orders, T/T and L/C are OK, and for small order we prefer 100% T/T before shipment.

5.Can we order customized colors.

Yes. A MOQ will apply and a longer lead-time is required. Please send us your Pantone Color no.

6.Shipping

We ship small batches by air, and large orders by containers.

7. Can we have our logo on products?

Yes, any item can be with a Logo

 




  • http://www.etrailer.com/Trailer-Lights/Optronics/STL27RB.html

    Today on our pontoon boat trailer, we're going to be installing the Optronix Miro-Flex waterproof rectangular stop, turn, and tail light with a license plate light as well, for the left hand side or driver side of your trailer. Part number STL27RB. Now, because our trailer already has a ground wire that runs to the front, I'm going to go ahead and trim off the ring terminal that comes with our new light, because we'll be making our connection with the ground, just using one of our heat-shrink style butt connectors. Go ahead and strip a little bit of wire back here on the ground wire. Go ahead and take the factory wiring, and you just strip some wire back on each of these three as well. Then, take our heat-shrink butt connectors. Put one on each of the wires, crimp it down. Go ahead and take our wires from the back side of the tail light, go ahead and connect those into the butt connector as well. Now, with all of our connections made, we can go ahead and use a heat gun to seal up these butt connectors.

    Note: Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.



    http://www.etrailer.com/tv-helpful_hints_tail_light_isolating_diode_system_38955.aspx

    Videos are provided as a guide only. Refer to manufacturer
    installation instructions and specs for complete information.
    This part is for a vehicle to vehicle towing kit. What this basically does is, say you have an RV or motor home or pickup truck and you’re going to towing another vehicle on all four wheels you’re going to need this wiring harness to make the lights on the towed vehicle work with the towing vehicle. We’ll start by showing you the different components of this kit, it’s really pretty simple if you break it down. First the connection here is a traditional four pole flat. So you have your four basic signals, your ground, running lights, left turn and right turn. You also have plenty of harness to attach this on the towed vehicle. When you make your connections on the towed vehicle itself, you have to install these diodes here. At the point where you make your connections on your vehicle whether it be your left or right turn or the running light circuit you will have to install these diodes.
    To give you a couple of quick notes about these, what happens is they do go in a specific direction in the wiring harness. to keep it simple basically the single prong here is listed as out, that goes onto the taillight itself out to the bulb. Then you get the two inputs here, one of the inputs is going to be the wire you just cut because you’re going to splice this in between the two. It does not matter which one, the wire is going to come in one side and out the other. This other pin here is going to provide input from your trailer harness coming from the towing vehicle itself. So for instance you would take your green wire here and run it to the other open end and it will go out and power your taillight being towed down the road by the RV. As you can see there’s 4 diodes and there’s a reason for that. There’s going to be one for the left and right turns, and both turn signals are going to have there accompanying running lights. So you’re going to need a diode for each of the running lights. Now we’ve opened up a small bag of parts which contains all the spade connectors needed to do the install. Basically what these are, you cut your wire that you need and you splice the wire back and expose about a quarter inch or so of it and these get crimped on. Be sure you have the right tool to do that with because it makes all the difference in the world with a tight connection and loose connection. Once you do that, it just slides onto the diode prong itself. You may also want to invest in some dielectric grease that will protect it and keep things out that would cause corrosion which would eventually cause an open circuit. As one final note you may want to take into account, if your towed vehicle has the same turn signal and brake light bulb, this kit is for you. If you have separate stop lights and turn signals, say for example your turn signals are amber that means there’s going to be a different box to achieve that so you have your separate turn signals and stop lights still the same. That covers part # 38955.

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Heart

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Star