100% Original Factory 1-1/4″ Ball Mount to Bangkok

100% Original Factory
 1-1/4″ Ball Mount to Bangkok

Short Description:

We are proud of the high customer satisfaction and wide acceptance due to our persistent pursuit of high quality both on product and service for 100% Original Factory 1-1/4″ Ball Mount to Bangkok, If you have any comments about our company or products, please feel free to contact us, your coming mail will be highly appreciated.



Product Detail

factory view

FAQ

Product Tags

With a complete scientific quality management system, good quality and good faith, we win good reputation and occupied this field for Dome Light Lens Cover , Rv Interior Light Lens Covers , Certifiedtowing Breakaway Kit , Hope we can create a more glorious future with you through our efforts in the future.
100% Original Factory 1-1/4″ Ball Mount to Bangkok Detail:

Ball Mount

Specification:

  1. 1.Hitch Ball Size :1″, 1-1/4″, etc.
    2. Drop: 1-1/4″, 2″, 4″, 6″, 8″ ,etc.
    3. Length:6″,7″,8″,9″, etc.
    4. Rise: 3/4” 1”, 2”, 3” 4-3/4”, etc.
    5. Capacity: 3500lbs, 6000lbs, etc.
    6. Surface treating: Zinc plating, Black Powder Coating, etc.
    7. Display Carton, Wooden Pallets and Bulk Packing are all available. des01des02

    Item No.

     Product Photo

    Product Specifications

    Description

    Drop

    Rise

    Length

    Capcity (lbs)

    LT-T2101

    des001 

    Ball Hole Size: 1″
    Material: Hot Roll Steel              Black Powder Coating

    2″

    3/4″

    8-1/2″

    6000lbs

    LT-T2102

    Ball Hole Size: 1″
    Material: Hot Roll Steel              Black Powder Coating

    4″

    2″

    7″

    6000lbs

    LT-T2103

    Ball Hole Size: 1″
    Material: Hot Roll Steel              Black Powder Coating

    6″

    4-3/4″

    9″

    5000lbs

    LT-T2104

    Ball Hole Size: 1″
    Material: Hot Roll Steel              Black Powder Coating

    8″

    6-1/4″

    7-1/2″

    5000lbs

    LT-T2151

    des002 

    2″Black Coated Ball Mount
    2″Chrome Hitch Ball
    5/8″ Hitch Pin

    2″

    3/4″

    8-1/2″

    5000lbs

    LT-T2152

    2″Black Coated Ball Mount
    2-5/16″Chrome Hitch Ball
    5/8″ Hitch Pin

    2″

    3/4″

    8-1/2″

    5000lbs

    LT-T2153

    4″Black Coated Ball Mount
    2″Chrome Hitch Ball
    5/8″ Hitch Pin

    4″

    2-3/4″

    9″

    6000lbs

    LT-T2154

    4″Black Coated Ball Mount
    2-5/16″Chrome Hitch Ball
    5/8″ Hitch Pin

    4″

    2-3/4″

    9″

    6000lbs

    LT-T2181

     des003 Reversible Ball Mount with 2″ and 2-5/16″ trailer balls weld to ball mount,Power coating

    Fits 2″ x 2″ receiver hitches

    5000lbs

    LT-T2182

     des004 Reversible Ball Mount with 2″ and 2-5/16″ trailer balls weld to ball mount,Power coating

    2″

    3/4″

    8-1/2″

    5000lbs

    LT-T2183

       des005 Reversible Ball Mount with1-7/8″, 2″ and 2-5/16″ trailer balls weld to ball mount, Power coating

    Fits 2″ x 2″ receiver hitches

    6000lbs

    LT-T2184

       des006 Reversible Ball Mount with1-7/8″, 2″ and 2-5/16″ trailer balls weld to ball mount, Chrome plated

    Fits 2″ x 2″ receiver hitches

    6000lbs

     

  2. Features:
  3. 1. Highest quality in strength and accuracy
    2. Have a quality finish and fine threads
    3. Connect the car and the driven vehicle, which work with the couplers and Hitch Ball.
    4. Easy installation and removal. Innovative quick release changes balls in seconds
    5. Hot forged solid steel to resist rust and corrosion
    6. ISO CE certificate & SGS test (according to customer requirements)
    7. Factory price rather than a trading company. We can promise you good quality and fast delivery

Product detail pictures:

100% Original Factory
 1-1/4″ Ball Mount to Bangkok detail pictures


Our staff are usually in the spirit of "continuous improvement and excellence", and while using the top-quality high-quality items, favorable value and superior after-sales services, we try to acquire each and every customer's belief for 100% Original Factory 1-1/4″ Ball Mount to Bangkok, The product will supply to all over the world, such as: Somalia , United Arab Emirates , Singapore , We are going to initiate the second phase of our development strategy. Our company regards "reasonable prices, efficient production time and good after-sales service" as our tenet. If you are interested in any of our solutions or would like to discuss a custom order, make sure you feel free to contact us. We have been looking forward to forming successful business relationships with new clients around the world in the near future.

Factory View:

 

QQ图片20161017101840

 

FAQ:

1. Lead Time / Delivery time of mass production

Normally our lead time is 20-35 days.

2.Can you provide free samples? Sample deliver Time?

Yes, one or two free samples are available and you are willing to pay for the air freight

3.MOQ  policy

As  for the trailer hitch series, there is no MOQ. And of course price will be different

according  to different quantity. The MOQ for car bike carrier is 1*20’ container.

4.Payment Terms

As for large orders, T/T and L/C are OK, and for small order we prefer 100% T/T before shipment.

5.Can we order customized colors.

Yes. A MOQ will apply and a longer lead-time is required. Please send us your Pantone Color no.

6.Shipping

We ship small batches by air, and large orders by containers.

7. Can we have our logo on products?

Yes, any item can be with a Logo

 




  • http://www.etrailer.com/Ball-Mounts/Weigh-Safe/WS10-2.html

    Today we’re going to be taking a look at the weigh safe ball mounts with the built in scale. These are available in a wide variety of drops and rises. See etrailer.com. The weigh safe ball mount helps promote safe towing. It lets you know if your load needs to be adjusted on your trailer before you tow, so you don’t overload your tow vehicle’s tongue weight. The difference between this ball mount and other ball mounts we sell, is it has a weight scale built into the ball mount platform that helps you balance your trailer. It’s calibrated at 1500 pounds but remains fully linear up to 3000 pounds.

    Note: Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.



    http://www.etrailer.com/dept-pg-Trunk_Bike_Racks.aspx

    Videos are provided as a guide only. Refer to manufacturer
    installation instructions and specs for complete information.

    Today we are going to show you part number TH962XT from Thule. This is the Thule Speedway Three-Bike Carrier. And this is a trunk-mounted rack. This is also available in a two-bike version, known as part number TH961XT. First we will point out the Thule Fit Dial here. Basically, what this does is adjust the spacing of the rack itself as it goes onto the vehicle. It is really easy to use. There are a variety of positions that you can use it on. It is pretty easy. You actually unscrew this bolt, here. And there is one on each side we just have the one in for now. You can see that it adjusts the rack itself to fit a variety of contours on the vehicle. From something like that, that would sit on the back of a car, to an SUV, or a station wagon where it may need to be flattened out. And what is nice about the instructions that come with this, the Dial Fit actually tells you what position to use for the type of vehicle you have. It makes it real easy to match up to your vehicle right off the bat. And also the arms, right here, do swing out of the way if you need to. There is one button on each side. Just push them in and they rotate down. Or, if you would like, you can actually take them apart.

    All right, let us go ahead and put this on the vehicle. We have already dialed to fit our SUV here. It is pretty simple. Basically, for the most part, you want to have the bar sitting on the trunk lid itself and the bumper. You take one of your top straps and just hold it into place. And it usually will catch the groove at the top of the hatch. You have one on each side. Take your second strap that goes on the side here, and you can catch it on the edge. Sometimes you may have to work up from the bottom edge to the place that you need to. And just keep tension on it. And the other half of the strap catches on the bottom edge of the trunk itself. You might want to take up some slack if you need to. And then take your last hook and put it underneath this edge, here. Now, you may need to open up the hatch to get into it in some models, or you can just loosen it up and slide it around the edge again.

    OK, let us go ahead and start taking up slack. Now, they do not need to be tight – but just take up some slack so everything stays in its place. And you repeat it for the other side. All right, once you have the straps in there in the right spots, then you go ahead and tighten them down. Basically, you just want to snug them up. You do not want to have a lot of force on them, but you want to make sure that the rack is secure on the vehicle itself. We will go ahead and start on one side and just tighten up the strap. It is kind of a good idea to push the rack into the vehicle and then take up the slack. And do a little bit on each side at a time to keep everything even, and make sure your rack stays even on the back of the vehicle, too. Then you can do the top straps – again, keeping the tension as even as possible. And if you have it done right, it should be snug enough where you can actually move the car with it. OK, and the last step is to go ahead and take your remaining straps and bundle them up as best as possible. So you can do anything you want. You can wind it up, maybe zip-tie it to the strap itself, or get another type of strap to hold these into place. It is totally up to the consumer.

    All right, let us go ahead and install a bike and show you how it looks on the back of the vehicle. And the bicycle is strapped into place and definitely will not go anywhere. And we will go ahead and show you some of the details of some of the cradles. All right, you can see the cradles here. They are really nice. They have a flexible rubber material on the bottom of each cradle so it does not mess up your bikes. And also you can see there are little grooves inside there for a cable so that does not rub up against your bike.

    And you also have two points where you can anchor the strap at, too. So you can move it along the left or right side, depending on the configuration of your bike. And it does come standard with the anti-sway cradles. Again, these are optional, so you can take these on or off if you want. They just snap on or off. And again, they have a strap down here which is fully adjustable. You actually have four points of contact for the strap – again, depending on how your bike can utilize it. The bicycle rack does come with a strap to keep the wheels from spinning around as you go down the road and to keep the handlebars straight. We will just actually wrap it around this one frame here for a demonstration, but you can wrap it around all three bikes to keep everything nice and straight. All right, and that covers our review of part number TH962XT, the Thule Speedway 3.

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the House

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Cup